Wednesday, March 27, 2019

Winlink Wednesday

This Winlink Wednesday we will do the same thing as last week, except, I will have you add a second line to your message that includes one Ham Radio themed skill you want to learn more about this year.

If you do not know what Winlink Wednesday is you can find out more here: Winlink Wednesday


Mat
K2MJM

Tuesday, March 26, 2019

It's No You, It's Me...

FYI, the repeater is offline.  It is headed back to the doctor to see if they can get the fans out of our signal.  Thursday's NET will be simplex on 448.800 Mhz.  We are going to try and run it from Station 76.

Thanks,

Mat
K2MJM

Wednesday, March 20, 2019

Winlink Wednesday

For this Winlink Wednesday we will be doing a standard check-in. No additional information will be required.

Thanks,

Mat
K2MJM

Friday, March 15, 2019

In Person Meet Tomorrow Reminder

Just a reminder.  In Person Meet, tomorrow 9:00 AM at Station 74.  Come by even if just to visit.

Mat
K2MJM

Tuesday, March 12, 2019

Winlink Wednesday - March 12th, 2019

This Winlink Wednesday we will do the same thing as last week.  I would like you add a weather report for your current location for the second line.

If you do not know what Winlink Wednesday is you can find out more here: Winlink Wednesday


Mat
K2MJM

6 Position, 30 Amp DC Power Distribution Board Details

I received and was able to assemble one of the 6 Position, 30 Amp DC Power Distribution boards today.  I think they turned out great.  This is one of our club fund raising kits we will have available Saturday for $30 at our in person meet.  Most circuit boards have 1 oz of copper per square foot.  These have 4 oz's as well as extra wide traces to handle the amperage.  I have include some pictures below.







Tuesday, March 5, 2019

Maker March In Person Meet March 16th

Our in-person meet this month will be one were we will building stuff.  I find these a lot of fun and the feedback we have received also indicates you all enjoy them as well.  We have three different kits we will be offering this year.  The first is our 1200 / 9600 baud TNC.  Information regarding the TNC can be found here: https://www.wvcarc.com/2018/03/tnc-pi-9k-kits.html

Second will be a new item.  It is a 6 position 30 AMP DC distribution board.  Information on this item can be found here: https://www.wvcarc.com/p/kit-dc-distribution-board.html

The last item is a 2 Meter roll up J-Pole.  These are great for portable use. It looks something like this: https://kb3kai.com/wp-content/uploads/2013/06/IMG_02171.jpg

We will also have cables to program radios as well as some cables to help people hook their TNC's to their radios.  Please sign up below.  As a reminder any profits from these kits goes back to the club to help fund activities and maintain the city repeater.

Winlink Wednesday

This Winlink Wednesday we will do the same thing as last week, except, I will have you add a second line to your message that includes the type / model of TNC that you are using.

If you do not know what Winlink Wednesday is you can find out more here: Winlink Wednesday


Mat
K2MJM

Saturday, March 2, 2019

Final Repeater Update

This is the final update on the repeater.  In a nutshell, it is done!  Today Curtis and I went and finished terminating the final two coax runs and grounded the lightning arresters.  Curtis donated a UPS for the packet server and we hooked up the 9600 baud packet radio.  I adjusted the repeater so that it would transmit at 30 watts.  It was transmitting at 15.  It is capable of transmitting at 40, but coverage seems sufficient where it is at.  Let me know if you notice anything weird.  Hopefully I am able to talk to you all on the repeater at some point.  Below are a few pictures and current status of our fire station deployment


Fire StationNotes
71Under Construction
72Not Started
73Complete
74Needs one Antenna Mounted
75Complete
76Needs one voice radio installed